Interlor Fill Percentage : 10% / Outline Overlap : 55% Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mmįirst Layer Height : 120% / First Layer Width : 95% / First Layer Speed : 50% Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO Interlor Fill Percentage : 10% / Outline Overlap : 35% Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2įirst Layer Height : 100% / First Layer Width : 98% / First Layer Speed : 50% Nozzle Diameter : 0.4mm / Retraction Distance : 2.4~2.6mm or Retraction Distance : 1.2mm, Retraction Vertical Lift : 0.6mm Largest part in printing, size = X 96mm, Y 134mm, Z 83mm, After full assembly size= X 264mm, Y 211mm, Z 74mm We wish you a lot of love for this first 3D printed airplane we designed. Please refer to the video for the printing and assembly process. To prevent the wheels from swinging, I made a clip that the original plane didn't have, so if you put it on, the wheels will not swing. It is recommended that the flap be fixed at the desired angle with adhesive.ģ. When printing the flap, it is recommended to set the infill to 100% and print very strongly.Ģ. If you apply excessive force while connecting the flap, it may break. There are a few caveats to printing and assembling this plane.ġ. It would be nice to trim it using a cutter. However, if these supports are not completely removed, the wings and flaps will not be connected, so please be careful that the supports are completely removed. These supports can be easily removed with pliers or cutting nippers. For this I made small custom supports on the wings and flaps. The difficult part in designing this plane was to assemble it separately so that the angle of the flaps on the wing could be changed. And I decided that I had accumulated enough experience and know-how, so I finally made it.Ī Dauntless SBD dive bomber that was very successful in defeating the Japanese at the Battle of Midway. So while designing other things, I continued to explore the possibilities. However, due to the nature of the shape of the airplane, there are many thin parts, so printing and assembly are difficult. In the meantime, there have been numerous requests for us to make airplanes.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |